Matrix Photowatt PW750-90
90 Watt 12 Volt Solar Panel

The PW 750 series modules use Photowatt's multi-crystalline technology. The 200 micron solar cells are individually characterized and electronically matched prior to interconnection. Encapsulation beneath high transmission tempered glass is accomplished using an advanced, UV resistant thermal setting plastic. The encapsulation, ethylene vinyl acetate, cushions the operating characteristics of the solar cell under virtually any climatic conditions. The rear surface of the module is completely sealed from moisture and mechanical damage by a continuous high strength polymer sheet.

The glass/tedlar construction of the module minimizes weight while providing a durable, protective environment for the solar cells. A double glass version is also available upon request.

This product is configured for 12 volt systems operation. Bypass diodes are factory fitted as standard. This module is designed with an optimum configuration that fulfills the most demanding PV applications including high voltage grid support systems.

Applications
RV, Recreational
Telecommunications
Cathodic Protection
Water Pumping
Signaling
Rural Electrification
Private Residences
Commerical Buildings
Grid Connected large scale systems

Electrical Characteristics:
Typical Peak Power (Pmax): 90 Watts
Min. Power: 85.1 Watts
Nominal Voltage: 12 Volts
Voltage @ Peak Power: 17.8 Volts
Current @ Peak Power: 5.0 Amps
Short Circuit Current: 5.7 Amps
Open Circuit Voltage: 22.20 Volts

Mechanical Characteristics
Dimensions (LxWxD): 48.7" x 21.89" x 1.77" (1237mm x 556mm x 45mm)
Weight: 17.2 lbs (7.8 kg)

Packaging per 2 units
Dimensions: 50.4"x23.4"x2.8" (1280 x 595 x 70mm)
Weight: 41.4lbs (18.8 kg)

UL Approved
25 Year Limited Warranty

Note: These panels are shipped in quantities of 20 and must ship by truck. Please call for a shipping quote and to order.