Designed for optimum use in residential and commercial grid tie applications, the GEPV-165-M solar module contains 54 single-crystal cells connected in series, and generates a peak power of 165 watts at 25.0 volts.

Features & Benefits

Exacting tolerances of ±5 percent ensure the module satisfies maximum rated power output
Robust and lightweight anodized aluminium frame with pre-drilled holes for quick installation
Engineered for the most rugged environments including hail, snow and ice storms
Supplied with industry standard multi-contact connectors

Typical Performance Characteristics
Peak Power (Wp): Watts 165
Maximum Power Voltage (Vmp): Volts 25.0
Maximum Power Current (Imp): Amps 6.6
Open Circuit Voltage (Voc): Volts 32.0
Short Circuit Current (Isc): Amps 7.4
Short Circuit Temperature Coefficient: mA/°C +3
Open Circuit Voltage Coefficient: V/°C -0.13
Maximum Power Temperature Coefficient: %/°C -0.5
Maximum Series Fuse: Amps 15

I-V parameters are rated at standard test conditions (irradiance of 1,000 W/m, AM 1.5 G, cell temperature 77° F / 25° C). As with all single-crystal PV modules, light-induced degradation may cause the module power to decrease about three percent from the typical maximum during the stabilization process that occurs during the first few days in service. All measurements are guaranteed at the laminate leads.

Overall Physical Properties
Length (A) 58.1 inches (1,477 mm)
Width (B) 38.4 inches (975 mm)
Depth of Frame (C) 1.4 inches (35 mm)
Depth Including J-box (D) 2.2 inches (55 mm)
Connector Length (when applicable) (E) 29.3 inches (743 mm)
Weight 39.0 pounds (17.7 kg)

Mounting Hole Locations
Center Spacing (F) 25.3 inches (643 mm)
Edge Distance (G) 16.4 inches (417 mm)
Width Spacing (H) 36.7 inches (931 mm)
Mounting Hole Diameter 0.26 inches (6.7 mm)

Physical Design Properties
Weight (Wind) Bearing Potential 50 lb/ft (125 mph equivalent)
Hailstone Impact Resistance 1 inch at 50 mph (25 mm at 80 kph)